SGM G-7 SPOT, Руководство пользователя

Страница: 38 / 44

38
Product Version 1.0 | Revision E | Released 2023-01-11
MAINTENANCE
SGM VACUUM TEST KIT
The Vacuum Test Kit is an accessory suitable for all SGM IP-rated
fixtures, made for testing the IP integrity upon reassembly.
In order to ensure the IP-rating of the i-6 Series, it’s highly recom-
mended that the fixture is always vacuum tested after installing or
swapping any part that might compromise the IP-rating, e.g.,
swapping the front lens.
SGM disclaims liability for any damage occasioned by the non-use,
or inability to use, the vacuum test kit after reassembling the
fixture.
Figure 29: SGM Vacuum Test Kit
USB - XLR UPLOADER CABLE
The SGM USB to DMX cable is an accessory used mainly to update
the fixture with the latest SGM firmware. See below how to update
the fixture with the latest firmware.
Both the SGM Uploader cable and the SGM Uploader cable POI are
also used for controlling the DMX values channel by channel
through the Firmware Uploader Tool software (available for down-
load at www.sgmlight.com)
Figure 30: SGM Uploader Cable
USB - POI UPLOADER CABLE
The SGM USB to DMX cable is an accessory used mainly to update
the fixture with the latest SGM firmware. See below how to update
the fixture with the latest firmware.
The SGM Uploader cable is also used for controlling the DMX values
channel by channel through the Firmware Uploader Tool software
(available for download at www.sgmlight.com).
Figure 31: SGM Uploader cable POI
Updated maintenance procedures and frequency are available at www.sgmlight.com under the respective product.