SGM G-7 SPOT, Руководство пользователя

Страница: 29 / 44

29
Product Version 1.0 | Revision E | Released 2023-01-11
RDM
SUPPORTED RDM FUNCTIONS
The G-7 Spot features support for various RDM functions.
RDM (Remote Device Management) is a protocol enhancement to USITT DMX512 that allows bi-directional commu-
nication between the fixtures and the controller over a standard DMX line. This protocol will allow configuration,
status monitoring and management. See the table below for supported RDM functions.
The controller communicates with the fixtures to show only the available options for each RDM function.
The G-7 Spot supports RDM, Remote Device Management, as per the ANSI E1.20 standard.RDM functions
To get access to all RDM functions please contact support@sgmlight.com.
SENSORS
RDM enables various sensor readouts for remote device monitoring. See the table below for sensors and sensor
types.
PID ACTIONS
ALLOWED
NAME PID ACTIONS
ALLOWED
NAME
0x0082 GET/SET Device Label 0x0501 GET/SET Display Level
0x0081 GET Manufacturer Label 0x0500 GET/SET Display Invert
0x00E0 GET/SET DMX Personality 0x0400 GET/SET Device Hours
0x00E1 GET Dmx Personality Descrip-
tion
0x0401 GET Lamp Hours
0x0200 GET Sensor Definition 0x0121 GET Slot Description
0x0201 GET/SET Sensor Value 0x0120 GET Slot Info
0x0080 GET Device Model Description 0x0122 GET Default Slot Value
0x1001 SET Reset Device 0x8626 SET CRMX Log Off
0x0051 GET Parameter Description 0x8633 GET/SET Enable Wireless DMX
0x0090 SET Factory Defaults 0x8625 GET/SET FAN 0=AUTO 1=LOW 2=HIGH 3=FULL
NAME SENSOR TYPE
Main PCB Temp Temperature
LED CMY PCB Temp Temperature
Zoom PCB Temp Temperature
LED Temp Temperature
Pan Angle Angle
Tilt Angle Angle
Wireless Signal Other
NAME SENSOR TYPE
Wireless Paired Other
Humidity Yoke Humidity
Humidity Head Humidity
Light PWM Other
Voltage 50v Voltage
Voltage 12v Voltage
PLEASE NOTE: THE RDM CONTROLLER COMMUNICATES WITH THE FIXTURES TO SHOW ONLY THE AVAILABLE
OPTIONS FOR EACH RDM FUNCTION. THE TABLE IS SUBJECT TO CHANGE WITHOUT NOTICE.