Installing the Curtain
Installing the curtain involves the following tasks:
°
Attach J-clips
: Magnetic curtain setting brackets, called J-clips, attach to the
rails or frame.
°
Set the curtain
: Support the curtain with the J-clips while you position the top
bar inside the housing.
°
Attach the threshold cables
: Drop two Kevlar cables wrapped inside the
housing and attach them to the threshold spools while the curtain rests on the
J clips.
°
Position and secure the curtain:
Use a jogger (provided by Smoke Guard
to certified installers) to position the curtain.
NOTE:
If possible, two people should set the curtain on the rails to reduce the chance of
damaging the curtain.
Model 600 component: curtain assembly
Tools/Materials:
°
2 J-clips
°
jogger
°
safety glasses
°
hand drill
°
5/16” hex driver
°
drill point screws
(provided)
°
120 VAC extension cord
with ground
To attach J-clips
: Position magnetic J-clips against the rails at bottom of the housing.
°
line up the tops evenly with each other, at least two inches below the
housing
°
line up the J portion on the outside edge of the rail:
CAUTION: Clean the magnets on the J-clips of debris to
avoid scraping the frame. Attach and remove carefully.
17
