SG Wireless SGW2828-EVK Скачать руководство пользователя страница 15

USGA6.01-V1.0 

SGW2828-EVK Evaluation Kit User Manual 

SG Wireless™ Confidential 

 

13 

Revision History

 

 

Revised 

Version 

Description 

6-Oct-2020 

1.0 

Initial document release 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Contact us at 

[email protected]

 for any queries, or find us at any channel below: 

 
Website: 

https://sgwireless.com/

 

LinkedIn: 

https://www.linkedin.com/company/sgwireless/ 

Facebook: 

https://www.facebook.com/sgwirelessIoT

 

Twitter: 

@sgwirelessIoT

 

 
 
 

Information in this document is provided solely to enable authorized users or licensees of SG Wireless products. Do not make printed or 
electronic copies of this document, or parts of it, without written authority from SG Wireless. 

 

 

SG Wireless reserves the right to make changes to products and information herein without further notice. SG Wireless makes no war-
ranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SG Wireless assume any 
liability arising out of the application of any product and specifically disclaims any and all liability, including without limitation consequen-
tial or incidental damages. SG Wireless does not convey any license under its patent rights nor the rights of others. SG Wireless products 
may not be used in life critical equipment, systems or applications where failure of such equipment, system or application would cause 
bodily injury or death. SG Wireless sells products pursuant to standard Terms and Conditions of Sale which may be found at 
https://www.sgwireless.com/page/terms.

 

 

SG Wireless may refer to other SG Wireless documents or third-party products in this document and users are requested to contact SG 
Wireless or those third parties for appropriate documentation.

 

 

SG Wireless™ and the SG and SG Wireless logos are trademarks and service marks of SG Wireless Limited. All other product or service 
names are the property of their respective owners. 

 

 

© 2020 SG Wireless Limited. All rights reserved.

 

Содержание SGW2828-EVK
















Отзывы: