SFC SFCR-MD, Руководство по эксплуатации

Страница: 30 / 48

25
3.1.10.4 Group switch
There are two ways to switch plans, one is manual switching, and the other is automatic polling.
3.1.10.4.1 Manual switch
You can see the preview pictures of all the saved plans in the "Plan Management" at the bottom left of the processor's control
software interface. Click the preview picture with the left mouse button to switch to the plan.
3.1.10.4.2 Automatic round tour
In the "Modal Management" list, you can see the preview picture of the saved plan. Click the preview picture with the left mouse
button to retrieve the plan; in addition, you can set the auto-rotation of the plan:
Select the plan that needs to be polled
Set the round time, ,unit is second
Click to start, click again to stop
3.1.11 Net video source
Network signals are divided into two categories: IP camera signals and PC network signals(Only suitable for FDMD models). PC
network signals include network desktop signals, network picture signals, streaming video signals, and background window signals. The
network signal is decoded and displayed on the screen by the built-in IP decoder of the processor.
3.1.11.1 Decoder setting
To make the decoder work, you first need to set an independent IP address for each IP decoder. The
decoder IP address setting method is as follows:

Click "Maintenance"-"Decoder" to pop up the decoder setting dialog box

The setting of the decoder IP address needs to be set manually. You can manually set the IP
address for each decoder card on the right side of the dialog box
After setting the IP address, click OK to complete the setting