SFC Energy EFOY Pro, Руководство по установке, Страница: 29 / 31

Electrical connection
 Shorten the cable to the required
length.

Fit the supplied fuse holder (for power
cables (20 A) and sense cables (2 A))
near the battery (A: recommended:
50 cm).

Fit the cable with suitable battery
terminals.

Always connect both the power and the
sense cables.
 Install the power and sense cables
separately where possible, so that the
current flowing through the power
cables does not falsify the
measurement of the battery voltage
through the sense cables.
The charging cable can be extended if required. In order to minimize ohmic losses in the
charging cable, the following cable cross-sections are recommended:
Length of charging cable Cable cross-section
Up to 10 m at least 4 mm
2
10–15 m at least 6 mm 2
6.2 Connection via power supply unit
(1) EFOY fuel cell
(2) Charging cable
(3) Battery
(4) Power supply unit