FWR424/FWR228 NVR User Manual
M4071-00
M4071-00
19
Seyeon Tech Co., Ltd
4.3 Setting of NVR IP
WAN IP setting is not necessary if remote access is not required.
In this case, you may skip this manual section [3.4 Setting of NVR IP].
There are two ways to set IP address to the NVR as follows:
-
Remote configuration through a Client PC.
-
Configuration through the local monitor.
To remote configure through a Client PC,
installation of
IP Installer
software (FlexWATCH® dedicated software) is required.
Please refer to IP Installer user manual linked below.
IP Installer software can be found in the enclosed CD or software download page at FlexWATCH® Web Site
(
http://www.FlexWATCH.com/support/download/software.asp
To configure thorugh the local monitor,
please follow the steps below:
⑦
Click
Congifuration
icon (
) at upper right corner on local screen.
⑧
Login with
ID
and
Password
when login window appears.
Virtual keyboard will appear on screen if a USB keyboard is not attached as shown below.
Otherwise, use USB keyboard to input login ID and Password.
