39
5 Maintenance
The
Dev. Test ...
menu appears.
3. Select a test from the menu (
General status
,
Fresh air
,
Test
gas H2
).
4. Carry out the test.
For detailed information, refer to the following sections:
−
General status Section 5.1.3
−
Fresh air
−
Test gas …
5.1.2.2 Concluding the device inspection
After all the tests have been carried out as described in Sec-
tion 5.1.3 to Section 5.1.5, the
Save
symbol will appear in the
display.
An integrated device inspection is concluded by saving it. Up to
40 device inspections can be saved. The following information
can be stored along with the device inspection:
● Inspector (e.g. inspector's name or initials)
●
Password to protect the protocol from being accessed by un-
authorised people
Inspector entries are saved automatically (ring memory with max.
10 entries).
Once the first inspector has been entered, the
Open
stored inspectors
function will become available.
1. Press
Save
.
2. Enter the name of the
inspector
.
a) Select the characters required using the jog dial. Confirm
each character using the jog dial.
OR
−
Press
Open stored inspectors
. A list of the stored in-
spectors will appear. Select the desired inspector. Open
the inspector with
OK
.
b) Then confirm your entry/selection with
OK
.
OR