24
5 SePem 01 Master
5.5.2
Patrol
Data saved in the logger is read out (collected) using the
Master
during a patrol.
The
purpose
of a patrol is to:
●
Keep track of the locations of leaks detected
●
Collect measurement results for viewing and evaluation at a
later point in time away from the location.
The
Patrol
window will appear as soon as
PATROL
is selected
from the menu (and confirmed). This will display an overview list
of the measurement results for all loggers that have been read.
PATROL
10:21
SERIAL
100 01 00034
100 01 00035
20
545
345
-
120
405
189
311
155
Delete list
4/5
100 01 00005
45
-
80
100 01 00010
Back
Missedlog.
Fig. 8: Patrol - overview of Loggers from which data has been collected
Note:
The
Patrol
window only displays loggers which have successful-
ly completed a measurement (with the exception of
Continuous
measurements, which do not have to be complete.)
The number of loggers read by and known to the
Master
(see
logger database) is shown in the top left-hand corner (in e.g. 4/5,
i.e. 4 loggers read, 5 loggers known).
The overview will usually be empty at the start of a patrol because
the list is automatically deleted from the overview and moved to
the
Patrol lists
when the unit is switched off.
F1
Missed log
displays a list of all loggers which have not
yet been read out during the current patrol. The loggers must be
saved in the logger database for this to happen.