26
5 Performing a correlation measurement
Performing a correlation measurement
CAUTION!
If you see a peak right in the middle of the screen,
this may indicate that radio transmitter
RT 06 is too
close to the
AC 06
(receiver). Increase the distance
between the two appliances to several (5 – 10)
meters.
5.3.1
Filtering
Please read section 8.4 on the basic principles of filtering.
The filtering option here from the function in the main screen offers
faster access to manual functioning than via Menu / Filter / Manual.
The range of functions here is, however, limited.
Select “Filter“ in the main screen.
The left filter limit flashes and can be set.
Enter key: calculates the result function; the other filter limit can
be set (can be repeated as often as you wish).
ON key: returns to the main screen, the result is displayed.
5.3.2
Cursor
If you select the “cursor” func
-
tion with the
arrow keys
, you
can place the cursor in any
position you desire with the
arrow keys
or the
rotary
regulator
.
The
measurement will be recal-
culated immediately in accord-
ance with the marked position.
The time indicated beside the
cursor indicates the time differ-
ence setting.
The distances stated under the
correlation function indicate the
distance of the cursor position
from the two microphones.
