24
7 Menu
Note:
b) and c) share a common storage area.
Measurements which were stored with a low resolution cannot
be post-post-processed (e.g., filtered) at a later date. Only the
central screen can be called up for viewing.
Functions: View of the central screen,
cursor navigation,
starting, continuing.
50 storage locations with low resolution are available.
Measurements which were stored with a high resolution can be
post-processed at a later date. This means that all functions which
are usually possible after closing (i.e., stopping) a measurement,
are also possible in this situation. Exception: It is not possible to
„continue“ the measurement.
Up to 25 storage locations are available. These locations are
shared with the „sound“ storage.
If you select Noise, the currently measured noise is stored for
approx. 7 seconds.
Pay attention to the following: Saving takes approx. 35 seconds
due to the high memory capacity. The process cannot be inter
-
rupted.
Use the arrow keys to select the item which you want to save:
z
Low resolution, High resolution or Noise.
After confirming with Enter, the measurement or noise signal
z
is saved.
7.3.2
Open
Use the arrow keys to select the item which you want to
open:
Low resolution, High resolution or Noise. Please note that it
z
takes approx. 25 seconds to load a sound.
Confirm your selection with the Enter key.
A list is displayed including all files of the
SeCorr 08
memory.
