sewerin Multitec 540, Руководство по эксплуатации

Страница: 21 / 64

14 │ 3 Operation
3.2.5 Settings
You can change the device settings and access information about
the device under Settings in the menu (section 3.3 ).
3.2.6 Saving a measurement
The current measurement values are saved using Save meas-
urement .
Note:
If the current measurement values are stable, the Save symbol
will be displayed.
Up to 80 measurements can be saved.
The measurement values can be saved with or without a com-
ment. Comment entries are saved automatically (ring memory
with max. 12 entries).
Once the first comment has been entered, the
Open
stored comments
function will become available.
The saved measurements can be read out on a comput-
er using the GasCom software. The software is available at
www.sewerin.com.
1. Press
Save .
OR
a) Press Menu .
b) Select Save measurement from the menu.
2. Enter a comment for the measurement.
a) Select the characters required using the jog dial. Confirm
each character using the jog dial.
OR
Press
Open stored comments . A list of the stored com-
ments will appear. Select the desired comment. Load the
comment with OK .