sewerin EX-TEC Combi, Руководство по эксплуатации

Страница: 78 / 134

69
9 System menu
9.4 Setting the inspection block
INSPECTION STOP
to make sure your EX-TEC
Combi is regularly checked
you can activate an inspec-
tion block
this block does not become
active until the next inspection
date has passed (cf. section
9.3: Setting the inspection
interval)
after that you cannot use the
instrument until the inspection
has been carried out and
confirmed (cf. section 7.9:
Inspection confirmation)
briefly pressing the
on/off key
brings you to the inspection-
block setting facility




Inspection-block condition
the last setting is displayed,
e.g.:
- OFF = block inactive
- ON = block active

by repeatedly pressing a
arrow key ...

... and confirming with the on/
off key you can set the desired
condition
