SEW MOVITRAC LTP series, Руководство по эксплуатации

Страница: 6 / 80

6
Operating Instructions – MOVITRAC® LTP
2
Installation and startup
Safety Notes
2 Safety Notes
MOVITRAC
®
LTP drive inverters may not perform safety functions without higher-level
safety systems.
Use higher-level safety systems to guarantee the protection of machinery and people.
Do not use MOVITRAC
®
LTP drive inverters for any safety functions in conjunction with
hoist applications.
Use monitoring systems or mechanical protection devices as safety features to avoid
possible injury or damage to property.
2.1 Installation and startup
• Never install or operate damaged products. Please submit a complaint to the
transport company immediately in the event of damage.
• Installation, startup and service work on the unit only by trained personnel .
The personnel must be trained in the relevant aspects of accident prevention and-
must comply with the regulations in force (e.g. EN 60204, VBG 4,
DIN-VDE 0100/0113/0160).
• Follow the specific instructions during installation and startup of the motor and
the brake!
• Make sure that preventive measures and protection devices correspond to the
applicable regulations (e.g. EN 60204 or EN 50178).
Grounding the unit is a necessary protective measure.
Overcurrent protection devices are a necessary protective measure.
• The unit meets all requirements for reliable isolation of power and electronics
connections in accordance with UL508. All connected circuits must also satisfy
the requirements for reliable isolation so as to guarantee reliable isolation.
• Take suitable measures to ensure that the connected motor does not start up
automatically when the inverter is switched on . To do this, you can connect binary
inputs DI01 through DI03 to GND.
• Integral solid state short circuit protection does not provide branch circuit pro-
tection.
Branch circuit protection must be provided in accordance with the National
Electrical Code and any additional local codes.