SEW MOVITRAC LTP series, Руководство по эксплуатации

Страница: 48 / 80

48
Operating Instructions – MOVITRAC® LTP
8
Selection of Parameter P2-01, Digital Input Function
Parameters
8.3.5 Real-time monitoring parameters
Parameter group zero provides access to internal drive parameters for monitoring pur-
poses. These parameters cannot be adjusted.
Par. Description Display range Explanation
P0-01 Bipolar analog input value –100 % ... 100 % 100 % = max input voltage
P0-02 2nd analog input value 0 ... 100 % 100 % = max input voltage
P0-03 Speed controller reference –500 % ... 500 % 100 % = Base frequency (P1-09)
P0-04 Digital speed ref (digi pot) – P1-01 … P1-01 Speed displayed in Hz / rpm
P0-05 Torque controller reference 0 ... 200 % 100 % = motor rated torque
P0-06 User PID ref input 0 ... 100 % PID controller reference value
P0-07 User PID feedback 0 ... 100 % PID controller feedback value
P0-08 User PID error input 0 ... 100 % Reference – Feedback
P0-09 User PID P-term 0 ... 100 % Proportional component
P0-10 User PID I-term 0 ... 100 % Integral component
P0-11 User PID D-term 0 ... 100 % Differential component
P0-12 User PID output 0 ... 100 % Combined output
P0-13 Output Torque 0 ... 200 % 100 % = motor rated torque
P0-14 Magnetizing current A rms Magnetizing current in A rms
P0-15 Rotor current A rms Rotor current in A rms
P0-16 Field strength 0 ... 100 % Magnetic field strength
P0-17 Stator resistance Ohm [
Ω
] Phase - Phase stator resistance
P0-18 Stator inductance H Stator inductance in Henry
P0-19 Rotor resistance Ohm [
Ω
] Calculated rotor resistance
P0-20 DC bus voltage V DC Internal DC bus voltage
P0-21 Drive temperature °C Internal drive temperature
P0-22 Supply voltage L1 – L2 V rms, ph-ph Phase – phase supply voltage
P0-23 Supply voltage L2 – L3 V rms, ph-ph Phase – phase supply voltage
P0-24 Supply voltage L3 – L1 V rms, ph-ph Phase – phase supply voltage
P0-25 Estimated Rotor speed Hz or rpm Applies to vector modes only
P0-26 kWh meter 0.0 … 999.9 kWh Cumulative energy consumption
P0-27 MWh meter 0.0 … 60000 MWh Cumulative energy consumption
P0-28 Software ID, IO processor e.g. “1.00”, “493F” Version number and check sum
P0-29 Software ID, Motor control e.g. “1.00”, “7A5C” Version number and check sum
P0-30 Drive serial number 000000 … 999999 00-000 … 99-999 Unique drive serial number
e.g. 540102 / 24 / 003
P6..
P60.
P600