SEW MOVIFIT FDC Скачать руководство пользователя страница 26

Страница: 26 / 140

Operating Instructions – MOVIFIT® FDC

Mounting

Mechanical Installation

4.3.2

Mounting

1. Bore the holes required for mounting at least 4 screws into the mounting surface ac-

cording to the previous figures. SEW-EURODRIVE recommends screws of size M6
and suitable dowel pins, if necessary.

2. Mount at least 4 screws on the mounting surface.

Use appropriate washers or screw and washer assemblies for the mounting plates
with special surface treatment for versions used in wet areas.

WARNING

Risk of crushing if the load falls.

Severe or fatal injuries.
• Do not stand under the load.

• Secure the danger zone.

CAUTION

Risk of injury due to protruding parts.

Risk of cutting or crushing.
• Cover sharp and protruding parts.

• The installation must only be carried out by qualified personnel.

758550411

min.

4 x M6

Содержание MOVIFIT FDC













































































































































Результаты поиска

Содержание MOVIFIT FDC

Отзывы:

SEW MOVIFIT FDC, Руководство по эксплуатации, Страница: 26 / 140

Результаты поиска

Содержание MOVIFIT FDC

Отзывы: