manualshive.com logo in svg

SEW-Eurodrive WOP11D-100-0, Руководство по эксплуатации

Поделиться
Скачать
SEW-Eurodrive WOP11D-100-0 Скачать руководство пользователя страница 12

2

Safety notes

Electrical connection

Operating Instructions – WOP11D-70-0, WOP11D-100-0 and WOP11D-150-0

12

2.8

Electrical connection

Familiarize yourself with the applicable national accident prevention regulations before
working on the product.

Perform electrical installation according to the pertinent regulations (e.g. cable cross-
sections,  fusing,  protective  conductor  connection).  The  documentation  at  hand  con-
tains additional information.

Ensure that all of the required covers are correctly attached after the electrical installa-
tion.

Protective measures and protection devices must comply with the regulations in force.

2.8.1

ESD protection measures

When using components at risk from electrostatic discharge (ESD), certain measures
must be observed to prevent the components from being damaged.

Special shoes with good conducting properties and anti-static cotton clothes must be
worn when working on the products. It is essential that all persons in ESD protection
areas  without  ESD  protection  clothing  do  not  touch  components  or  printed  circuit
boards. Visitors must be informed of the regulations in force.

Printed board assemblies may only be transported using the plug-in systems or trays
designed for this purpose. Printed circuit boards may only be dispatched in ESD pack-
aging material.

2.8.2

Electromagnetic compatibility (EMC)

The  product  meets  the  requirements  stipulated  in  the  EMC  Directive  2014/30/EU.  If
the user makes modifications and/or additions to the product, the requirements for the
CE declaration of conformity can no longer be met.

2.9

Startup and operation

Observe the safety notes in the chapters Startup and Operation in the documentation.

Always keep the product clean.

Make sure that the screen is not touched by any sharp objects.

2.10

Service/maintenance

Use only spare parts and accessories manufactured according to the specifications of
SEW‑EURODRIVE. SEW‑EURODRIVE is not liable for modifications, changes, addi-
tions and / or alterations to the product.

Clean the screen with a commercial glass cleaner and a dry and clean cloth.

26860481/EN – 03/2021

Содержание WOP11D-100-0





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды