4
Interface adapter USM21A
Connecting the interface adapter
Manual – Interface Adapter USM21A
10
4.4
Connecting the interface adapter
Connecting an engineering PC to a unit via the interface adapter USM21A requires
various connection cables.
A shielded USB connection cable of type USB A‑B, which is included in the delivery, is
required to connect an engineering PC to the interface adapter. SEW‑EURODRIVE
recommends exclusively using the supplied USB connection cable.
It is possible to connect the interface adapter to the following units from
SEW‑EURODRIVE:
Key to the connection cables:
•
RJ10 = 2 x RJ10 connectors
•
D‑sub = RJ10 connector and 9‑pin D‑sub connector (available as option)
•
M12 = Optional design: RJ10 connector and M12 socket (available as option)
Device
Interface
Connection cable
Engineering software
RS485
CAN
RJ10
D-sub
M12
•
MOVIDRIVE
®
B
•
MOVITRAC
®
B
•
MOVIFIT
®
MC/FC/SC
•
MOVIMOT
®
MM..D
•
MOVISAFE
®
UCS..B
•
MOVISAFE
®
DCS..B
X
X
MOVITOOLS
®
MotionStudio ver-
sion V6.30 or later
In preparation:
•
MOVIGEAR
®
B
•
DRC electronic motor
X
X
X
MOVITOOLS
®
MotionStudio (in
preparation)
In preparation:
•
MOVIAXIS
®
X
X
MOVITOOLS
®
MotionStudio (in
preparation)
When using an EtherCAT
®
master without mailbox
gateway function:
•
MOVIDRIVE
®
modular
with CiA402 device pro-
file
•
MOVIDRIVE
®
system
with CiA402 device pro-
file
X
X
MOVISUITE
®
standard SP9 or
later; recommended version:
MOVISUITE
®
standard SP9 ser-
vice pack 1, V2.0.114.100 or
later.
MOVIDRIVE
®
technology
X
X
MOVISUITE
®
standard SP10 or
later
MOVIGEAR
®
performance
X
X
X
MOVISUITE
®
standard SP9 ser-
vice pack 1 V2.0.114.100 or later.
28516273/EN – 11/2018
