background image

6

Manual – Data Matrix Positioning System PCV80A-F200-R4-V19-SEW

1

Rights to claim under warranty

General Information

1.3

Rights to claim under warranty

A requirement of fault-free operation and fulfillment of any rights to claim under limited
warranty is that you adhere to the information in the documentation. Therefore read the
documentation before you start working with the unit. 

1.4

Content of the documentation

This document contains additional safety-related information and conditions for opera-
tion in safety-related applications.

1.5

Exclusion of liability

You must comply with the information contained in this documentation to ensure safe
operation and to achieve the specified product characteristics and performance fea-
tures. SEW-EURODRIVE assumes no liability for injury to persons or damage to equip-
ment or property resulting from non-observance of these operating instructions. In such
cases, any liability for defects is excluded.

1.6

Product names and trademarks

All product names in this documentation are trademarks or registered trademarks of
their respective titleholders.

1.7

Copyright

© 2013 – SEW-EURODRIVE. All rights reserved.

Copyright law prohibits the unauthorized duplication, modification, distribution, and use
of this document, in whole or in part. 

Содержание PCV80A-F200-R4-V19-SEW









































Отзывы: