SEW-Eurodrive MOVISAFE CSB51A, Руководство пользователя

Страница: 35 / 52

9
Data exchange with higher-level controller
Possible acknowledgment procedures of the safety option
Manual – MOVISAFE
®
CSB51A Safety Option
35
Byte Bit Name Value Description
3 0 Reserve
1 Reserve
2 Reserve
3 Reserve
4 Reserve
5 Reserve
6 Reserve
7 Reserve
9.4.1 Substitute values
For all outgoing process data (F-PE), the value "0" is written as the substitute value.
One exception is
Fault state . For Fault state , the value "1" is written as the substitute
value in the case of a fault-free protocol. In the case of a faulty F-protocol, the value
"0" is written for
Fault state .
9.5 Possible acknowledgment procedures of the safety option
9.5.1 Acknowledging fault-free data exchange using PROFIsafe
The PROFIsafe communication must be fault-free for safe data exchange of the safety
option via PROFIsafe. As soon as there is an acknowledgment request of the safety
option via the
ACK_NEC bit in the F-periphery data component, the user must trigger
an acknowledgment by a rising edge via the ACK_REI bit.
9.5.2 Acknowledging the fault
As soon as the safe data exchange of the safety option using PROFIsafe is fault-free,
faults in the safety option can be acknowledged by a rising edge with the
Fault ac-
knowledgment bit in the F-process output data.
25931075/EN – 04/2019