SEW-Eurodrive MOVISAFE CSB51A, Руководство пользователя

Страница: 23 / 52

7
Startup
Parameterization of the drive safety functions
Manual – MOVISAFE
®
CSB51A Safety Option
23
7.3 Parameterization of the drive safety functions
7.3.1 Prerequisites
For a successful startup, you need the "Assist CS.." parameterization tool. You can
call up the "Assist CS.." parameterization tool directly in MOVISUITE
®
.
INFORMATION
Only one "Assist CS.." parameterization tool at a time must be used in the system.
7.3.2 Parameterization procedure
This chapter describes the parameterization of the drive safety functions step-by-step.
1. Start MOVISUITE
®
.
2. Scan the network.
Scan the network that contains the engineering interface to the basic device.
3. Start the "Assist CS.." parameterization tool.
Start the "Assist CS.." parameterization tool from the MOVISUITE
®
interface.
A window opens with a prompt to enter the ID of the safety key and the password.
4. Enter the memory module ID and establish a connection.
Enter the memory module ID of the safety option to be parameterized and the cor-
responding password and confirm the entry with [OK].
The memory module ID is printed on the memory module. During the initial startup
you can set a password by entering it twice.
The querying of the memory module ID ensures that the "Assist CS.." parameteri-
zation tool connects to the correct device.
As an alternative, you can read the memory module ID via the "Assist CS.." para-
meterization tool. Proceed as follows:
• Click the [Read memory module ID] button.
• Check if the addressed device signals a read memory module ID via the "F-
RUN" LED (see chapter "F-RUN LED"). This process must only take a minute.
After one minute, the device LED does not flash anymore and confirmation of
the flash code is no longer accepted. In this case, restart the flash code query.
• The read memory module ID is applied in the "Memory module ID" field.
5. Upload the current parameterization of the device.
After successful login in the "Assist CS.." parameterization tool, the current para-
meter setting of the CSB51A safety option is compared with the current parameter
setting in the "Assist CS..". If the data sets are identical, the "Assist CS.." parame-
terization tool starts. In case of deviation, a dialog opens in which the user can
choose whether the data set of the safety option or the data set of the "Assist CS.."
is used.
25931075/EN – 04/2019