SEW-Eurodrive MOVIPRO PHE Series, Руководство по эксплуатации, Страница: 76 / 100

8
Operation
Status and error messages
Operating Instructions – MOVIPRO
®
PHE..B-A15-.1X0..B-00
76
8.4.2 Status LEDs
The device features additional LEDs for servicing. The status LEDS display additional
status information. The following table is used exclusively for diagnostics by the
SEW‑EURODRIVE Service.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[13]
[10]
[12]
[11]
[14]
[15]
[16]
11948037899
LED LED status Description
[1] Positive half wave
command Lights up red The device receives positive half
waves from the command rail.
[2] Phase failure There is a phase failure.
[3] Software status Flashes red The device software on the control
is operating.
[4] 24 V supply Lights up green There is an internal 24 V supply.
[5] Supply service interface The service interface is supplied.
[6] Frequency inverter bus
supply Lights up yellow The frequency inverter bus is sup-
plied. This LED only lights up when
the operating switch is switched
on.
[7] CPU supply Lights up green The CPU is supplied.
[8] Negative half wave
command Lights up red The device receives negative half
waves from the command rail.
[9] DIO00 The digital input 0 or the digital
output 0 is set.
[10] DIO01 The digital input 1 or the digital
output 1 is set.
[11] DI02 The digital input is set.
[12] DI03
[13] DI04
[14] DI05
[15] DI06
[16] DI07
23576855/EN – 10/2017