SEW-Eurodrive MOVIPRO PHE Series Скачать руководство пользователя страница 65

Страница: 65 / 100

Startup

For your safety

Operating Instructions – MOVIPRO

PHE..B-A15-.1X0..B-00

Startup

7.1

For your safety

WARNING

Risk of injury due to uncontrolled device behavior caused by ineffective emergency
switching off circuit.

Severe or fatal injuries.

•

Have the installation carried out only by qualified personnel.

WARNING

Risk of injury due to device malfunction caused by incorrect device setting.

Severe or fatal injuries.

•

Make sure that the installation was carried out by trained specialists.

•

Check the parameters and data sets.

•

Only use settings that are correct for the function.

WARNING

Risk of injury and possible damage to property if the motor starts up unintentionally.

Fatal or severe injuries and damage to property.

•

Set the device to a safe state.

•

Switch off the output stage.

•

De-couple the drive.

•

Deactivate auto-reset for drives that start up automatically.

WARNING

Electric shock due to missing or defective protection covers.

Severe or fatal injuries.

•

Make sure all protection covers are installed properly.

•

Never start the device if the protection covers are not installed.

WARNING

Danger of electric shock due to open connections.

Severe or fatal injuries.

•

Never start the device if the touch guard is not installed.

INFORMATION

Observe the safety notes in chapter "Safety notes" > "Startup/Operation".

23576855/EN – 10/2017

Содержание MOVIPRO PHE Series





































































































Результаты поиска

Содержание MOVIPRO PHE Series

Отзывы:

SEW-Eurodrive MOVIPRO PHE Series, Руководство по эксплуатации, Страница: 65 / 100

Результаты поиска

Содержание MOVIPRO PHE Series

Отзывы: