SEW-Eurodrive MOVIPRO PHC2 Series, Руководство по эксплуатации, Страница: 165 / 188

10
Technical data
General
Operating Instructions – MOVIPRO
®
PHC2.A-A..M1-E45C-C5
165
10.2 General
Basic device
Size Size 1 Size 2
Performance class 2.2 kW/4 kW/7.5 kW 11 kW/15 kW/22 kW
Interference immunity Complies with EN 61800-3
Interference suppression level A to EN 55011
Interference emission Limit value class C3 to EN 61800-3
Ambient temperature ϑ
U
+5 – +40 °C
Non-condensing, no moisture condensation
Device is intrinsically safe with respect to temperature. When the
temperature of the heat sink is too high, the device switches off and
the error message "Overtemperature" is issued.
Ambient temperature derating EN 60721-3-3
Climate class Class 3K3
Storage temperature ϑ
L
-25 – +70 °C
Degree of protection IP54
Restrictions in use / installa-
tion altitude
• Up to h < 1000 m without restrictions.
• The following restrictions apply to heights ≥ 1000 m:
– From 1000 m to max. 4000 m:
I
N
reduction by 1% per 100 m
– From 2000 m to max. 4000 m:
U
N
reduction by AC 6 V per 100 m
Mass 21 kg 35 kg
Dimensions W × H × D 570 × 300 × 189 mm 660 × 420 × 202 mm
10.3 Input data
Basic device
X121.
Size Size 1 Size 2
Performance class 2.2 kW 4 kW 7.5 kW 11 kW 15 kW 22 kW
Power supply Three-phase current
Input voltage range 3 × AC 380 – 500 V
Line frequency f
line
50 – 60 Hz
Supply current
(at U
line
= 3 × AC 400 V)
I
line
AC 5 A AC 8.6 A AC 14.4 A AC 21.6 A AC 28.8 A AC 41.4 A
26596598/EN – 10/2020