SEW-Eurodrive MOVIPRO ADC, Руководство по эксплуатации

Страница: 59 / 244

7
Electrical installation
UL-compliant installation
Operating Instructions – MOVIPRO
®
ADC
59
7.4 UL-compliant installation
INFORMATION
Due to UL requirements, the following chapter is always printed in English independ-
ent of the language of the documentation.
7.4.1 Power terminals
Use 75 °C copper wire only.
7.4.2 Short circuit current rating
• MOVIPRO
®
is suitable for use on a circuit capable of delivering not more than
200,000 rms symmetrical amperes when protected by fuses and circuit breakers
as described in the tables below.
• MOVIPRO
®
is suitable for use on a circuit capable of delivering not more than
65,000 rms symmetrical amperes when protected by ABB and Rockwell Type E
Combination Motor controllers as described in the tables below.
Max. voltage is limited to 500 V.
7.4.3 Branch circuit protection
Integral solid state short circuit protection does not provide branch circuit protection.
Branch circuit protection must be provided in accordance with the National Electrical
Code and any additional local codes.
For MOVIPRO
®
use branch circuit protection as follows:
Three Phase 380 V – 500 V Voltage Range
SCCR:
200 kA/500 V
When protected by:
SCCR:
200 kA/500 V
When protected by:
SCCR: 65 kA/480 V
When protected
by:
1)
SCCR: 65 kA/460 V
When protected by:
Model
Non Semicon-
ductor Fuses (cur-
rents are maximum
values)
Inverse-Time Cir-
cuit Breaker
Type E Combinationen Motor Controller
PHC21A-
A022M1-...A-00/..
40 A/600 V 50 A max/500 V min
ABB, Model
MS132‑6.3
Rated 480 V, 3 HP
Rockwell Automa-
tion, Model
140M‑C2E-B63
Rated 460 V, 5 HP
PHC21A-
A040M1-...A-00/..
40 A/600 V 50 A max/500 V min
ABB, Model
MS132‑10
Rated 480 V, 5 HP
Rockwell Automa-
tion, Model
140M‑C2E-C10
Rated 460 V, 7.5 HP
PHC21A-
A075M1-...A-00/..
40 A/600 V 50 A max/500 V min
ABB, Model
MS132‑16
Rated 480 V, 10 HP
Rockwell Automa-
tion, Model
140M‑D8E-C16
Rated 460 V, 10 HP
22749055/EN – 04/2016