SEW-Eurodrive MOVIPRO ADC, Руководство по эксплуатации

Страница: 210 / 244

11
Technical data
Digital inputs
Operating Instructions – MOVIPRO
®
ADC
210
11.8 Digital inputs
Digital inputs
Number of inputs 12 – 16
Input type PLC-compatible according to EN 61131-2 (digital inputs type 3)
Signal level +15 – +30 V "1" = contact closed
Signal level −3 – +5 V "0" = contact open
Potential reference 0V24_C
The overall current consumption of the I/O periphery (including the encoder) should not exceed DC 2.5 A.
11.9 Digital outputs
Digital outputs
Number of outputs 0 – 4
Output type PLC-compatible according to EN 61131-2, interference-voltage proof and
short-circuit proof (up to 30 V)
Rated current 500 mA
Potential reference 0V24_C
The overall current consumption of the I/O periphery (including the encoder) should not exceed DC 2.5 A.
11.10 Electronics data
Electronics data
Electronics supply
24 V_C (continuous)
V
IN
= DC 24 V -15% / +20% according to EN 61131-2
I
I
≤ 700 mA, typically 500 mA
(with external DC 24 V supply without connected 400 V)
Sensor/actuator supply
24 V_C (continuous)
V
IN
= DC 24 V -15% / +20% according to EN 61131-2
I
I
≤ 2000 mA for sensor/actuator supply
(depending on the number and type of the connected sensors/actuators)
4 outputs with 500 mA each
Analog input A11 Operating mode: DC 0 – +10 V or DC -10 V – +10 V
Resolution: 12 bits
Sampling time: 1 ms
Internal resistance: 40 kΩ
22749055/EN – 04/2016