SEW-Eurodrive MOVIPRO ADC, Руководство по эксплуатации

Страница: 209 / 244

11
Technical data
Encoder
Operating Instructions – MOVIPRO
®
ADC
209
11.7.2 Motor encoder
X3011
Nominal output voltage DC 12 V
Maximum output current 650 mA
(Total load for all encoder outputs)
Permitted encoder types
• HIPERFACE
®
encoders
• Sin/cos encoder AC 1 V
pp
• TTL encoder with negated tracks
• Encoder with signal level to RS422
Permitted pulses per revolu-
tion 128/256/512/1024/2048 increments per revolution
Maximum line length 30 m
11.7.3 Distance encoder (CANopen)
X3211
Nominal output voltage DC 24 V
Maximum output current 500 mA
Permitted encoder types CANopen encoder
Internal terminating resistor 120 Ω
Maximum line length 30 m
11.7.4 Multi-distance encoder
X3222
Nominal output voltage DC 12 V or DC 24 V
Maximum output current at DC 12 V: 650 mA (total load for all encoder outputs)
at DC 24 V: 400 mA
Permitted encoder types • EnDat encoder
• Encoder with signal level to RS422
• HIPERFACE
®
encoders
• HTL encoder
• Sin/cos encoder AC 1 V
pp
• SSI encoder
• SSI Combi encoder
• TTL encoder with negated tracks
Permitted pulses per revolu-
tion 2 – 4096 increments/revolution
Maximum line length 30 m
22749055/EN – 04/2016