SEW-Eurodrive MOVIPRO ADC, Руководство по эксплуатации

Страница: 13 / 244

2
Safety notes
Target group
Operating Instructions – MOVIPRO
®
ADC
13
2.3 Target group
Specialist for
mechanical work
Any mechanical work may only be performed by adequately qualified personnel. Qual-
ified personnel in the context of this documentation are persons familiar with the
design, mechanical installation, troubleshooting and maintenance of the product, who
possess the following qualifications:
• Training in mechanical engineering, e.g. as a mechanic or mechatronics technician
(final examinations must have been passed)
• They are familiar with this documentation
Specialist for elec-
trotechnical work Any electronic work may only be performed by adequately skilled persons (electric-
ally). Qualified electricians in the context of this documentation are persons familiar
with electrical installation, startup, troubleshooting and maintenance of the product,
who possess the following qualifications:
• Training in electrical engineering, e.g. as an electrician or mechatronics technician
(final examinations must have been passed)
• They are familiar with this documentation
In addition to that, they must be familiar with the applicable safety regulations and
laws, especially with the requirements of the performance levels according to
DIN EN ISO 13849‑1 and all other standards, directives and laws specified in this doc-
umentation. The above-mentioned persons must have the express authorization of the
company to operate, program, parameterize, label and ground devices, systems and
circuits in accordance with the standards of safety technology.
Instructed persons All work in the areas of transportation, storage, operation and waste disposal must be
carried out by persons who are trained appropriately. The purpose of the instruction is
that the persons are capable of performing the required tasks and work steps in a safe
and correct manner.
22749055/EN – 04/2016