SEW-Eurodrive MOVIMOT MM D Series, Руководство пользователя

Страница: 166 / 200

13
Operation with the MOVITOOLS
®
MotionStudio engineering software
Communication via Ethernet
Manual – PROFINET IO Interfaces, Field Distributors
166
13.5.4 Communication parameters for SMLP
The following table shows the communication parameters for SMLP:
Communication
parameter
Description Information
Timeout
Waiting time in ms that the
client waits for a reply from
the server after it has made
a request.
• Default setting: 1000 ms
• If a delay of the communication
causes failure, increase the
value.
Broadcast
IP address
IP address of the local net-
work segment
within
which the device scan is
carried out.
In the default setting, the device
scan only retrieves devices in the
local network segment.
IP address
SMLP server
IP address of the SMLP
server or of other devices
that are to be included in
the device scan but are
outside the local network
segment.
• Enter the IP address of devices
that are to be included in the
device scan but are
outside the
local network segment.
• If you are operating an indirect
communication from Ethernet to
PROFIBUS, enter the IP ad-
dress of the controller.
Excluded
IP address
IP addresses of devices
that should
not be included
in the device scan.
Enter the IP address of devices that
should
not be included in the
device scan. This can be devices
that are not ready for communica-
tion (e.g. because they have not
been started up yet).
22870857/EN – 12/2016