SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Руководство по эксплуатации, Страница: 313 / 416

11
Technical data and dimension sheets
Technical data
Operating Instructions – MOVIGEAR
®
performance
313
11.3.12 Electronics data – Drive safety functions
The table below shows the technical data for the drive unit relating to the integrated
safety technology.
The safe digital inputs comply with type 3 according to IEC 61131‑2.
Reference potential for the F_STO_P1 and F_STO_P2 is F_STO_M (contact at ter-
minal X9:11).
Terminal desig-
nation
General electronics data
Safety contact STO X9
Electrical data of inputs F_STO_P1,
F_STO_P2 Minimum Typical Maximum
Input voltage range X9:1 and X9:21 DC -3 V DC 24 V DC 30 V
Input capacitance against STO_M – 300 pF 500 pF
Input capacitance against GND – 300 pF 500 pF
Power consumption at DC 24 V F_STO_P1 – 150 mW 200 mW
F_STO_P2 – 150 mW 200 mW
Sum
1)
– 300 mW 400 mW
Input voltage for ON status (STO) DC 11 V – –
Input voltage for OFF status (STO) – – DC 5 V
Permitted leakage current of the external safety
controller – – 1 mA
Technical data
Time from disconnecting the safety voltage until
deactivation of the rotating field – 1.5 ms 10 ms
2 ms
2)
Time from connecting the safety voltage until ac-
tivation of the rotating field – – 110 ms
1) Each drive unit always requires a power consumption of 300 mW.
2) Only when a safety card by SEW‑EURODRIVE is used
25945475/EN – 04/2019