SEW-Eurodrive Movigear Performance MGF**-DFC-C Series, Руководство по эксплуатации, Страница: 27 / 416

3
Unit structure
Example nameplate and type designation of electronics
Operating Instructions – MOVIGEAR
®
performance
27
3.11 Example nameplate and type designation of electronics
3.11.1 Nameplate
The following figure shows an example of the nameplate for the connection unit and
the electronics cover. For the structure of the type designation, refer to the chapter
"Type designation of the electronics cover".
[1]
[2]
Type: CUI1H-DFC-5D3-C/DI
S0#:
Eingang/Input
U= AC 3x380...500V
I= AC 2.0A
f= 50...60Hz
T= -25°C...+40°C ML 03
Status: 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00
U= 3x0V...Uinput
I= AC 2.0A
AC 6.0A Imax=
f= 0...599Hz
Ausgang/Output
01.7569637422.0001.19
Type: DFC20A-0020-503-A-000-001
S0#: 01.7569637422.0001.19
00 00 00 00 00 00 00 00 00
D-76646 Bruchsal
Made in Germany
9007224941612171
[1] Connection unit nameplate
[2] Electronics cover nameplate
3.11.2 Type designation of electronics cover
The following table shows the type designation of the electronics cover:
DFC Product family
DFC = D irect F ieldbus C ommunication electronics cover
2 Communication type
2 = PROFINET IO
3 = EtherNet/IP™, Modbus TCP
4 = POWERLINK
0 Connection configuration
0 = M12 plug connector on electronics cover (standard)
A Communication version
–
0020 Nominal current drive unit
0020 = 2.0 A
0025 = 2.5 A
0032 = 3.2 A
0040 = 4.0 A
0055 = 5.5 A
–
5 Connection voltage
5 = AC 500 V
25945475/EN – 04/2019