SEW-Eurodrive MOVIGEAR DAC B, Руководство по эксплуатации

Страница: 111 / 258

Operating Instructions – MOVIGEAR® DAC-B
111
7
Executing functions with the units
Operation of MOVITOOLS
®
MotionStudio
7.5 Executing functions with the units
7.5.1 Parameterizing units
Units are parameterized in the parameter tree. It displays all unit parameters, grouped
into folders.
You can manage the unit parameters using the context menu and the toolbar. The
following steps illustrate how to read/edit unit parameters.
7.5.2 Reading/changing unit parameters
Proceed as follows to read or change unit parameters:
1. Switch to the required view (project view or network view).
2. Select the connection mode:
• Click the "Switch to online mode" button [1] if you want to read or change
parameters directly on the unit .
• Click the "Switch to offline mode" button [2] if you want to read or change
parameters in the project .
3. Select the unit you want to parameterize.
4. Open the context menu and select the [Parameter tree] command.
Then, the "Parameter tree" view opens on the right section of the screen.
5. Expand the "Parameter tree" up to the node you require.
6. Double-click to display a particular group of unit parameters.
7. Press the enter key to finalize any changes you make to numerical values in the input
fields.
9007200389198219
[1] "Switch to online mode" icon
[2] "Switch to offline mode" icon
2445127435
[1] [2]
[1]
[2]
INFORMATION
For detailed information about the unit parameters, refer to chapter "Parameter list".
0 0
I