manualshive.com logo in svg

SEW-Eurodrive MOVIFIT-FC, Руководство по эксплуатации, Страница: 9 / 172

Поделиться
Скачать
SEW-Eurodrive MOVIFIT-FC Скачать руководство пользователя страница 9

2

Safety Notes

Transportation and storage

Operating Instructions – MOVIFIT

®

-FC

9

2.5

Transportation and storage

Observe the notes on transportation, storage and proper handling. Observe the climatic
conditions as stated in the "Technical Data" sections.

2.6

Installation

The units must be installed and cooled according to the regulations in the relevant
documentation.
Protect MOVIFIT

®

-FC from excessive strain.

The following applications are prohibited unless the unit is explicitly designed for such
use:
• Use in potentially explosive areas
• Use in areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc.
• Use in non-stationary applications with strong mechanical oscillation and impact

loads; see section "Technical Data".

2.7

Electrical connection

Observe applicable national accident prevention guidelines when working on a live
MOVIFIT

®

-FC (e.g., BGV A3).

Electrical installation must be carried out according to pertinent regulations (e.g. line
cross sections, fusing, and protective earth connection). The documentation contains
additional information.
You will find notes on EMC-compliant installation (e.g., shielding, grounding, configura-
tion of filters, and routing of lines) in the MOVIFIT

®

-FC documentation. The manu-

facturer of the system or machine is responsible for observing the limits established by
EMC legislation.
Protective measures and protection devices must comply with the regulations in force
(e.g. EN 60204 or EN 61800-5-1).

2.8

Safe disconnection

MOVIFIT

®

-FC meets all requirements for safe disconnection of power connections and

electronic connections in accordance with EN 61800-5-1. In order to guarantee safe
disconnection, all connected circuits must also satisfy the requirements for safe discon-
nection.

Содержание MOVIFIT-FC













































































































































































Отзывы:

Нет отзывов