SEW-Eurodrive MOVIFIT-FC, Руководство по эксплуатации, Страница: 124 / 172

7
Operation
Status LEDs for MOVIFIT®-FC
124
Operating Instructions – MOVIFIT
®
-FC
"STO" LED The following table shows the statuses of the "STO" LED:
"F-STATE" LED The following table shows the statuses of the "F-STATE" LED:
LED Status Meaning
STO Yellow • Drive has stopped safely ("STO active").
Off • Drive has not stopped safely ("STO inactive").
LED Status Meaning Remedy
F-STATE Green • Option S11 is currently performing
a cyclical data exchange with the
F-Host.
• Standard operating state:
-
Red • Fault status in the safety part
• 24V_O supply voltage not available
• Read diagnostic in F-Host.
• Eliminate the cause of the fault
and acknowledge the fault in
the F-Host.
Off • S11 option is currently in the initializa-
tion phase.
• S11 option is not available or is not
configured in the bus master (slot 1 is
empty).
• Check voltage supply.
• Check configuration of the bus
master.
Flashing
red/
green A fault occurred in the safety part; cause
of the fault already remedied – acknowl-
edgement required. Acknowledge fault in the F-Host
(reintegration).
WARNING
Incorrect interpretation of the "FDI.", "FDO.", "STO", and "F-STATE" LEDs
Severe or fatal injuries
• The LEDs are not safety-oriented and may not be used as a safety device.