manualshive.com logo in svg

SEW-Eurodrive MOVIFIT compact, Руководство по эксплуатации, Страница: 76 / 120

Поделиться
Скачать
SEW-Eurodrive MOVIFIT compact Скачать руководство пользователя страница 76

7

Operation

General information

Operating Instructions – MOVIFIT

®

 compact

76

7

Operation

7.1

General information

INFORMATION

You  must  comply  with  the  general  safety  notes  in  the  chapter  "Safety  notes"  during
startup.

 WARNING

Electric shock caused by dangerous voltages at the connections, cables, and motor
terminals.

When  the  device  is  switched  on,  dangerous  voltages  can  occur  at  the  connectors
and  at  any  connected  cables  and  motor  terminals.  This  also  applies  even  if  the
device is inhibited and the motor is at standstill.

Severe or fatal injuries.

•

Do not switch under load.

•

Before performing any work on the device, disconnect it from the voltage supply.
Note that dangerous voltages can occur at the terminals and connections for up
to 1 minute after the controller is switched off.

•

Block the output stage of the inverter before switching at the output of the device.

 WARNING

Risk of electric shock from capacitors that have not fully discharged.

Severe or fatal injuries.

•

De-energize  the  MOVIFIT

®

  device.  Observe  the  minimum  switch-off  time  after

disconnection from the supply system:

–

1 minute

 WARNING

Risk of injury and possible damage to property due to automatic restart of the drive
after fault elimination or after a reset.

Fatal or severe injuries and damage to property.

•

Disconnect the device from the power supply before rectifying a fault if automatic
restart of the driven machine is not permitted for safety reasons.

•

After  a  reset,  make  sure  that  the  drive  can  start  up  automatically  depending  on
the setting.

 WARNING

Danger of burns due to hot surfaces of the device (e.g. the heat sink).

Serious injuries.

•

Do not touch the device until it has cooled down sufficiently.

22527060/EN – 08/2017

Содержание MOVIFIT compact

























































































































Отзывы:

Нет отзывов