SEW-Eurodrive MOVIFIT compact Скачать руководство пользователя страница 44

Страница: 44 / 120

Startup

Requirements

Operating Instructions – MOVIFIT

compact

WARNING

Danger of burns due to hot surfaces of the device (e.g. the heat sink).

Serious injuries.

•

Do not touch the device until it has cooled down sufficiently.

NOTICE

Danger due to arcing.

Damage to electrical components.

•

Do not unplug the power connectors during operation. Do not plug in the power
connectors during operation.

•

Never remove the EBOX during operation.

INFORMATION

During startup and parameterization, written parameters are stored in non-volatile
memory (e.g. in an EEPROM). However, memory modules only allow a certain num-
ber of write cycles.

•

For this reason, ensure that write accesses to parameters do not take place cyc-
lically.

6.2

Requirements

The following conditions apply to startup:

•

The MOVIFIT

compact device must be mechanically and electrically installed in

accordance with regulations.

•

Appropriate safety measures prevent the drives from starting up unintentionally.

•

Appropriate safety measures must be taken to prevent personal injury or damage
to machine.

The following hardware must be present in order to start up and parameterize the
MOVIFIT

compact device:

•

MBBG11A operator panel, see chapter "Connecting the MBBG11A operator
panel"

•

or PC/laptop, see chapter "Connecting a PC/laptop"

The following software must be installed on the PC or laptop in order to start up and
parameterize the MOVIFIT

compact inverter:

•

MOVITOOLS

MotionStudio, version 6.2 or above

22527060/EN – 08/2017

Содержание MOVIFIT compact

























































































































Результаты поиска

Содержание MOVIFIT compact

Отзывы:

SEW-Eurodrive MOVIFIT compact, Руководство по эксплуатации, Страница: 44 / 120

Результаты поиска

Содержание MOVIFIT compact

Отзывы: