SEW-Eurodrive Movidrive MDX60B, Краткое руководство по эксплуатации

Страница: 8 / 64

2
Safety notes
Designated use
Compact Operating Instructions – MOVIDRIVE
®
MDX60B/61B
8
2.3 Designated use
Drive inverters are components intended for installation in electrical systems or ma-
chines.
In case of installation in machines, startup of the inverters (meaning the start of desig-
nated use) is prohibited until it is determined that the machine meets the requirements
stipulated in the Machinery Directive 2006/42/EC; EN 60204 must be observed.
Startup (i.e. the start of designated use) is only permitted under observance of the
EMC Directive (2014/30/EU).
The drive inverters meet the requirements stipulated in low voltage guideline 2014/35/
EU. The harmonized standards of the EN 61800-5-1/DIN VDE T105 series in connec-
tion with EN 60439-1/VDE 0660 part 500 and EN 60146/VDE 0558 are applied to
these inverters.
Adhere to the technical data and information on the connection requirements as
provided on the nameplate and in the documentation.
2.3.1 Safety Functions
MOVIDRIVE
®
MDX60/61B drive inverters may not perform safety functions without
higher-level safety systems. Use higher-level safety systems to ensure protection of
equipment and personnel.
For safety applications, observe the specifications in the "MOVIDRIVE
®
MDX60B/61B
Functional Safety" manual.
2.4 Transportation and storage
Observe the notes on transportation, storage and proper handling. Observe the cli-
matic conditions as stated in the section "General technical data".
2.5 Setup
The units must be installed and cooled according to the regulations and specifications
in the corresponding documentation.
Protect the drive inverters from excessive strain. Ensure that elements are not de-
formed and/or insulation spaces are maintained, particularly during transportation.
Avoid contact with electronic elements and contacts.
Drive inverters contain components that can be damaged by electrostatic energy and
improper handling. Prevent mechanical damage or destruction of electric components
(may pose health risk).
The following applications are prohibited unless the device is explicitly designed for
such use:
• Use in potentially explosive atmospheres.
• Use in areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc.
• Use in non-stationary applications which are subject to mechanical vibration and
impact loads in excess of the requirements in EN 61800-5-1.
24770531/EN – 11/2017