4
Unit structure
Accessory equipment
Operating Instructions – Explosion-Protected MOVI-SWITCH
®
Drives
16
4.4
Accessory equipment
4.4.1
Mounting variants
The following table shows possible output designs:
Designation
Category
Option
/FI
/3D
IEC foot-mounted motor with specification of shaft height
/FG
7-series integral motor, as stand-alone motor
/FF
IEC flange-mounted motor with bore
/FT
IEC flange-mounted motor with threads
/FL
General flange-mounted motor (other than IEC)
/FM
7-series integral gearmotor with IEC feet, with specification of
shaft height if required
/FE
IEC flange-mounted motor with bore holes and IEC feet, with
specification of shaft height
/FY
IEC flange-mounted motor with thread and IEC feet, with spe-
cification of shaft height if required
/FK
General flange-mounted motor (other than IEC) with feet, with
specification of shaft height if required
4.4.2
Mechanical attachments
The following table shows possible mechanical attachments:
Designation
Category
Option
BE
/3D
Spring-loaded brake with specification of size
/RS
Backstop (line-powered only)
4.4.3
Ventilation
The following table shows possible ventilation variants:
Designation
Category
Option
/AL
/3D
Metal fan (standard)
/C
Canopy for fan guard (standard in mounting position V1)
4.4.4
Other additional features
The following table shows an additional feature:
Designation
Category
Option
/2W
/3D
Second shaft end on the motor/brakemotor
25988670/EN – 04/2020
