manualshive.com logo in svg

SEW-Eurodrive MOVI-PLC, Руководство пользователя, Страница: 77 / 108

Поделиться
Скачать
SEW-Eurodrive MOVI-PLC Скачать руководство пользователя страница 77

Manual – MOVI-PLC® Application Solution "SyncCrane" 

77

7

System description

Auxiliary Drive (Auxiliary Axis)

7

Auxiliary Drive (Auxiliary Axis)

7.1

System description

7.1.1

Fields of application

Many applications with the SyncCrane application module are characterized by
controlling several sequences of motion via a common interface between MOVI-PLC

®

and the higher-level fieldbus master.

In many crane applications, for example, more auxiliary drives are required in addition
to the feed axes synchronized using the SyncCrane application module in order to
control the lifting and Z movement of the load suspension.

Example: Hall crane with 3 motion axes:

Up to 4 auxiliary axes can be integrated without additional programming work. The
ApplicationBuilder wizard is available for startup and diagnostics.

Users can choose between 3 different profiles to cover an as large as possible
application area:

• Position 16 bit

• Position 32 bit

• Velocity

One of the 3 profiles can be set for each of the 4 auxiliary axes. The profile is accessed
using 4 process data words.

682447883

Axis

Description

X

Motion sequence of the synchronized feed axes controlled via SyncCrane interface.

Z

Position-controlled axis for moving the load suspension.

Y

Position-controlled axis for lifting movement of the load suspension.

Содержание MOVI-PLC













































































































Отзывы:

Нет отзывов