SEW-Eurodrive MOVI-PLC basic DHP11B-T0, Руководство пользователя

Страница: 74 / 96

6
PROFIBUS-DP-V1 Functions
Project planning for a C1 master
74
Manual – MOVI-PLC
®
basic DHP11B.. controller
6.4 Project planning for a C1 master
The GSD file SEW-6007.GSD is required for the project planning of a DP-V1 C1 master.
This file activates the DP-V1 functions of the MOVI-PLC
®
basic DHP11B.. controller.
Operating mode
(DP-V1 mode) The DP-V1 operating mode is usually activated during project planning for a C1 master.
All DP slaves, which have the DP-V1 functions enabled in their GSD file and which
support DP-V1, will be operated in the DP-V1 mode. Standard DP slaves will still be run
via PROFIBUS-DP. This ensures mixed mode is run for DP-V1 and DP-capable
modules. Depending on the specifications of the master functions, a DP-V1-capable
station that was configured using the DP-V1 GSD file can run in the DP operating mode.
6.5 Appendix
Example program
for SIMATIC S7 The STEP7 code stored in the GSD file shows how parameters are accessed via the
STEP7 system function blocks SFB 52/53. You can copy the STEP7 code and
import/compile it as STEP7 source.
Technical data
DP-V1 for the
DHP11B control
card
0x18 Number of values is not
consistent Write request: Number of parameter data
values that do not match the number of
elements in the parameter address 0
0x19 Axis nonexistent Access to an axis which does not exist –
up to 0x64 Reserved – –
0x65..0xFF Manufacturer-specific – –
Error no. Meaning Used at Supplem. Info.
GSD file for DP-V1: SEW-6007.GSD
Module name for project planning: MOVI-PLC
Number of parallel C2 connections: 2
Supported data set: Index 47
Supported slot number: Recommended: 0
Manufacturer code: 10A hex (SEW-EURODRIVE)
Profile ID: 0
C2 response timeout 1s
Max. length C1 channel: 240 bytes
Max. length C2 channel: 240 bytes
0 0
I