SEW-Eurodrive MOVI-PLC basic DHP11B-T0, Руководство пользователя

Страница: 73 / 96

6
PROFIBUS-DP-V1 Functions
Structure of the DP-V1 parameter channel
Manual – MOVI-PLC
®
basic DHP11B.. controller
73
PROFIdrive return
codes for DP-V1 The following table shows the coding of the error number in the PROFIdrive DP-V1
parameter response according to PROFIdrive profile V3.1. This table applies if you use
the PROFIdrive services
Request Parameter or Change Parameter .
Error no. Meaning Used at Supplem. Info.
0x00 Impermissible parameter
number Access to unavailable parameter 0
0x01 Parameter value cannot be
changed Change access to a parameter value
that cannot be changed Subindex
0x02 Low or high limit exceeded Change access with value outside the
value limits Subindex
0x03 Faulty subindex Access to unavailable subindex Subindex
0x04 No array Access with subindex to non-indexed
parameter 0
0x05 Incorrect data type Change access with value that does not
match the data type of the parameter 0
0x06 Setting not permitted (can
only be reset) Change access with value unequal to 0
where this is not permitted Subindex
0x07 Description element cannot
be changed Change access to a description element
that cannot be changed Subindex
0x08 Reserved (PROFIdrive Profile V2: PPO-Write
requested in IR not available) –
0x09 No description data avail-
able Access to unavailable description
(parameter value is available) 0
0x0A Reserved (PROFIdrive Profile V2: Access group
wrong) –
0x0B No operation priority Change access without rights to change
parameters 0
0x0C Reserved (PROFIdrive Profile V2: Wrong pass-
word) –
0x0D Reserved (PROFIdrive Profile V2: Text cannot be
read in cyclic data transfer) –
0x0E Reserved (PROFIdrive Profile V2: Name cannot be
read in cyclic data transfer) –
0x0F No text array available Access to text array that is not available
(parameter value is available) 0
0x10 Reserved (PROFIdrive Profile V2: No PPO-Write ) –
0x11 Request cannot be
executed because of oper-
ating state Access is temporarily not possible for
reasons that are not specified in detail 0
0x12 Reserved (PROFIdrive Profile V2: Other error)
0x13 Reserved (PROFIdrive Profile V2: Data cannot be
read in cyclic interchange)
0x14 Value impermissible Change access with a value that is within
the value limits but is not permissible for
other long-term reasons (parameter with
defined single values) Subindex
0x15 Response too long The length of the current response
exceeds the maximum transmittable
length 0
0x16 Parameter address imper-
missible Illegal value or value which is not
supported for the attribute, number of
elements, parameter number or
subindex or a combination 0
0x17 Illegal format Write request: Illegal format or format of
the parameter data which is not
supported 0
0 0
I