SEW-Eurodrive MOVI-C UHX65A-M Скачать руководство пользователя страница 7

Страница: 7 / 60

General information

Structure of the warning notes

Manual – MOVI-C

CONTROLLER progressive UHX65A-M

1.4

Structure of the warning notes

1.4.1

Meaning of signal words

The following table shows the grading and meaning of the signal words for safety
notes.

Signal word

Meaning

Consequences if disregarded

DANGER

Imminent hazard

Severe or fatal injuries

WARNING

Possible dangerous situation

Severe or fatal injuries

CAUTION

Possible dangerous situation

Minor injuries

NOTICE

Possible damage to property

Damage to the product or its envi-
ronment

INFORMATION

Useful information or tip: Simplifies
handling of the product.

1.4.2

Structure of section-related safety notes

Section-related safety notes do not apply to a specific action but to several actions
pertaining to one subject. The hazard symbols used either indicate a general hazard
or a specific hazard.

This is the formal structure of a safety note for a specific section:

SIGNAL WORD

Type and source of hazard.

Possible consequence(s) if disregarded.

•

Measure(s) to prevent the hazard.

Meaning of the hazard symbols

The hazard symbols in the safety notes have the following meaning:

Hazard symbol

Meaning

General hazard

26881144/EN – 02/2022

Содержание MOVI-C UHX65A-M





























































Результаты поиска

Содержание MOVI-C UHX65A-M

Отзывы:

SEW-Eurodrive MOVI-C UHX65A-M, Руководство пользователя, Страница: 7 / 60

Результаты поиска

Содержание MOVI-C UHX65A-M

Отзывы: