manualshive.com logo in svg

SEW-Eurodrive MOVI-C UHX65A-M, Руководство пользователя, Страница: 22 / 60

Поделиться
Скачать
SEW-Eurodrive MOVI-C UHX65A-M Скачать руководство пользователя страница 22

7

Operating characteristics with the PROFINET

PROFINET fieldbus interface

Manual – MOVI-C

®

 CONTROLLER progressive UHX65A-M

22

7

Operating characteristics with the PROFINET

The controller is a PROFINET IO controller.

7.1

PROFINET fieldbus interface

The supported features of the PROFINET fieldbus interface can be found in the "Tech-
nical data" chapter in the operating instructions of the respective controller.

The device is connected to the other network nodes using a category 5, class D twis-
ted-pair cable in accordance with IEC 11801, edition 2.0.

INFORMATION

According  to  IEEE  802.3,  200  edition,  the  maximum  cable  length  for
10  MBaud/100  MBaud  Ethernet  (10BaseT/100BaseT)  between  2  network  nodes  is
100 m.

7.1.1

The integrated Ethernet switch

The controller is equipped with an integrated 2‑port Ethernet switch for connecting the
fieldbus technology. The following network topologies are supported:

•

Tree topology

•

Star topology

•

Line topology

•

Ring topology

INFORMATION

Note  that  an  IEC  program  with  a  suitable  fieldbus  station  must  be  loaded  on  the
MOVI-C

®

  CONTROLLER  progressive  UHX65  to  support  the  integrated  Ethernet

switch.

7.1.2

Switch latency time

The  number  of  industrial  Ethernet  switches  connected  in  line  impacts  the  telegram
runtime.  If  a  telegram  passes  through  the  bus  stations,  the  telegram  runtime  is
delayed by the latency time of the Ethernet switch.

The  integrated  switch  operates  using  the  cut-through  method.  The  latency  time  is
about 5.5 µs.

7.1.3

Auto-crossing

The two ports leading out of the Ethernet switch have auto-crossing functionality. You
can use both patch and crossover cables to connect to the next Ethernet node.

7.1.4

Auto-negotiation

The baud rate and duplex mode are negotiated by both Ethernet nodes when estab-
lishing  the  connection.  For  this  purpose,  both  Ethernet  ports  of  the  Ethernet  connec-
tion  support  an  auto-negotiation  functionality  and  work  with  a  baud  rate  of  either
100 Mbit or 10 Mbit in full duplex or half duplex mode.

26881144/EN – 02/2022

Содержание MOVI-C UHX65A-M





























































Отзывы:

Нет отзывов