4
Installation notes
Mechanical installation
Manual – MOVI-C
®
CONTROLLER advanced with PROFINET IO Fieldbus Interface
26
Inserting the master module
Proceed as follows:
ü
The retaining screws [1] and [2] are screwed into the prepared mounting grid in
the control cabinet but not tightened.
1. Place the module with the slotted holes on the unit base plate onto the retaining
screws [1] from the top.
BF
X4
0
X4
1
L/
A
UH
X4
5A
-N
L/A
US
1
XM
5
A
0
L
/A
L/A
X8
1
X3
0
X
5
2.
1.
[1]
[2]
21228294027
2. Push the module backwards to insert the retaining screws [2] into the upper holes
in the unit base plate.
3. Lower the module.
4. Tighten the retaining screws [1] and [2].
24777730/EN – 01/2018
