4
Installation notes
Mechanical installation
Manual – MOVI-C
®
CONTROLLER advanced with PROFINET IO Fieldbus Interface
23
Compact controller
In preparation to the control cabinet installation, MOVI-C
®
CONTROLLER must be
mounted to a carrier plate.
80
/A
X5
X30
X31
L/A
L/A
1
2
3
4
1
3
85
US1
BF
L/A
X4
0
L/A
UH
X4
5A
-N
X4
1
5
6
XM
[1]
[3]
[4]
[5]
[2]
21394946187
[1]
Support plate
[4]
Screw
[2]
MOVI‑C
®
CONTROLLER
[5]
Cam
[3]
Recess
Mounting the carrier plate
Proceed as follows:
1. Install the housing of the MOVI‑C
®
CONTROLLER [2] so that the cams [5] fit into
the recesses [3] at the carrier plate [1].
2. Push the housing of the MOVI‑C
®
CONTROLLER [2] downward to the stop at the
cams [5].
3. Tighten the screw [4].
Removing the carrier plate
Proceed as follows:
1. Loosen the screw [4].
2. Pull the housing of the MOVI-C
®
CONTROLLER [2] upward and remove it toward
the front.
24777730/EN – 01/2018
