SEW-Eurodrive MFC1/FHX Series, Руководство по эксплуатации, Страница: 143 / 164

10
Technical data and dimension sheets
Port overview
Operating Instructions – MOVI-C
®
FIELD CONTROLLER standard/advanced
143
10.4 Port overview
10.4.1 Interface description
The interfaces of the
MOVI‑C
®
FIELD CONTROLLER
have the following functions:
• X43_1/X43_2 – EtherCAT
®
/SBus
PLUS
interface for the master port
• X4233_1/X4233_3 – fieldbus interfaces for the slave port
• X4224 – engineering interface
• X9 – system bus interface and RS485 interface
10.4.2 Engineering interface
INFORMATION
Ports 21 and 23 are initially closed and can be opened via the configuration.
Port TCP/
UDP Function Authorization
21 TCP FTP Reading from and writing to the file system
23 TCP Telnet Reading OEM diagnostic data
310 TCP/
UDP
Data Streaming Reading and writing of all indexed parameters
11740 –
11743
TCP CODESYS engineering Read and write
1740 - 1743 UDP CODESYS engineering Read and write
4840
CODESYS OPC UA server
8080 HTTP CODESYS web server
10.4.3 PROFINET
Port TCP/
UDP Function Authorization
Dynamic
port defini-
tion via End
Point Map-
per
UDP PROFINET DCE/RPC Reading and writing on all indexed parameters
Ethertype 8892hex Process data exchange Controlling connection
Ethertype 88B5hex Address Editor from
SEW‑EURODRIVE
Reading and writing of all address parameters
of the Ethernet interface
310 TCP/
UDP
Data Streaming Reading and writing of all indexed parameters
161 UDP SNMP Reading on MIBs
80 TCP Integrated web server Read
26872137/EN – 12/2021