manualshive.com logo in svg

SEW-Eurodrive MFC1/FHX Series, Руководство по эксплуатации, Страница: 13 / 164

Поделиться
Скачать
SEW-Eurodrive MFC1/FHX Series Скачать руководство пользователя страница 13

2

Safety notes

Designated use

Operating Instructions – MOVI-C

®

 FIELD CONTROLLER standard/advanced

13

2.5

Designated use

The product is intended for installation in electrical plants or machines.
In case of installation in electrical systems or machines, startup of the product is pro-

hibited until it is determined that the machine meets the requirements stipulated in the

local laws and directives. For Europe, Machinery Directive 2006/42/EC as well as the

EMC Directive 2014/30/EU apply. Observe 

EN 

60204-1 (Safety of machinery - elec-

trical equipment of machines). The product meets the requirements stipulated in the

Low Voltage Directive 2014/35/EU.
The standards given in the declaration of conformity apply to the product.
Technical  data  and  information  on  the  connection  conditions  are  provided  on  the

nameplate and in chapter "Technical data" in the documentation. Always comply with

the data and conditions.
Unintended or improper use of the product may result in severe injury to persons and

damage to property.
Do not use the product as a climbing aid.

2.5.1

Restrictions under the European WEEE Directive 2012/19/EU

You may use options and accessories from SEW-EURODRIVE exclusively in connec-

tion with products from SEW-EURODRIVE.

2.6

Functional safety technology

The product must not perform any safety functions without a higher-level safety sys-

tem unless explicitly allowed by the documentation.

2.7

Transportation

Inspect the shipment for damage as soon as you receive the delivery. Inform the ship-

ping company immediately about any damage. If the product is damaged, it must not

be assembled, installed or started up.
Observe the following notes when transporting the device:
• Ensure that the product is not subject to mechanical impact.
• Before transportation, cover the connections with the supplied protection caps.
• Only place the product on the cooling fins or on the side without connectors during

transportation.

If necessary, use suitable, sufficiently dimensioned handling equipment.
Observe the information on climatic conditions in chapter Technical data of the docu-

mentation.

2.8

Installation/assembly

Ensure that the product is installed and cooled in accordance with the regulations in

the documentation.

26872137/EN – 12/2021

Содержание MFC1/FHX Series





































































































































































Отзывы:

Нет отзывов