manualshive.com logo in svg

SEW-Eurodrive MFC1/FHX Series, Руководство по эксплуатации, Страница: 129 / 164

Поделиться
Скачать
SEW-Eurodrive MFC1/FHX Series Скачать руководство пользователя страница 129

9

Inspection and maintenance

Inspection and maintenance work

Operating Instructions – MOVI-C

®

 FIELD CONTROLLER standard/advanced

129

9

Inspection and maintenance

9.1

Inspection and maintenance work

9.1.1

Preliminary work regarding inspection and maintenance

Observe the following notes before you start with inspection/maintenance work:

 WARNING

Electric shock caused by dangerous voltages in the connection box.
Severe or fatal injuries.
• Before  removing  the  connection  box  cover,  de-energize  unit  via  a  suitable  ex-

ternal disconnection device.

• Secure the device against unintended re-connection of the voltage supply.

 WARNING

Risk of burns due to hot surfaces.
Serious injuries.
• Let the devices cool down before touching them.

9.1.2

Connection cables

Observe the notes in chapter "Preliminary work for inspection and maintenance".
Check the connection cables for damage at regular intervals and replace if necessary.

26872137/EN – 12/2021

Содержание MFC1/FHX Series





































































































































































Отзывы:

Нет отзывов