87
Commissioning
Commissioning
21
Operating manual [27779289/EN] - MAXO-RG single-axis controls
258
_10
0300
06/EN - 0
3/2
022
21.2
Installation
21.2.1
Attachment
Fig. 21-1 Fastening the control; size in [mm]
*Screw length: L = Te + D
safety washer
+ D
washer
+ T
carrier material
D: Thickness of the component (disc); T: Depth of the component; carrier material: Sus-
pension on the vehicle
Tightening torque:
6.4 Nm
(note the screws’ strength class)
⚠
WARNING
Danger from incorrect assembly - loosening the screw connection
Accidents with serious injuries and property damage
•
Controls must be screwed to all four fastening points.
•
Screw connection must be carried out so the fastening does not loosen during op-
eration.
•
The screw connection must be checked at regular intervals.
•
Specifications for the screw-in depth must be observed -> recommended screw-in
depth.
ITEM Component
Description
Position A1 ... A4: Control attachment points
A1-A4 Press-in sockets M10
M6 press-in socket closed, "blind hole"
Position B: Screw connection structure (recommendation)
1
Screw M10
Recommendation M6x
L
*; 8.8; Allen or Torx
2
Safety washer S, M10
Safety washer with spring action
3
Washers M10
-
Position C: Mounting sockets on the housing
4
Control housing
-
5
Press-in socket
M10 press-in socket closed, "blind hole"
T
e
Screw-in depth
Recommended screw-in depth: 14 mm
T
e,
max
Max. screw-in depth
Maximum screw-in depth: 16 mm