SEW-Eurodrive M1 N Series, Руководство по сборке и эксплуатации

Страница: 90 / 112

8
Lubricants
Lubricant table
Assembly and Operating Instructions – M1..N Series Single-Stage Helical Gear Units
90
8.2 Lubricant table
NOTICE
Selecting improper lubricants may damage the gear unit.
Possible damage to property.
• Contact SEW‑EURODRIVE if you operate the unit under extreme conditions,
such as cold, heat, or if the operating conditions have changed since project
planning.
The lubricant table shows the permitted lubricants for SEW‑EURODRIVE industrial
gear units. Observe the abbreviations used, the meaning of shading, and the notes.
Symbols Designation
CLP = Mineral oil
CLP HC = Synthetic polyalphaolefin
E = Ester oil (water hazard classification 1 (German regulation: WKG 1))
= Mineral lubricant
= Synthetic lubricant
3) = Lubricants may only be used if service factor F
s
≥ 1.3
4) =
Take into account critical starting behavior at low ambient tempera-
tures
6) = Ambient temperatures
= Lubricant for the food industry (food grade oil)
Oil Oil
=
Biodegradable oil (lubricant for agriculture, forestry, and water man-
agement)
29203856/EN – 03/2020